Hitte Natural Convection Trench Heating

Hitte Natural Convection Trench Heating

From: £220.00

Hitte Natural Convection Trench heating is ideal for counteracting heat loss and condensation in highly glazed areas, using a piped hot water (LPHW) supply to deliver heat to the air by means of a heat exchanger that rises naturally from floor level. Hot water can be supplied from a conventional hot water boiler, solar energy hot water system or a ground source heat pump. The heat output directly relates to the flow/return temperatures of that source. Internal surfaces are insulated and coated with heat reflective finish to improve the efficiency of the trench.

Select a product from stock below for fast delivery, or contact our Technical Sales Team to explore and select from the vast range of dimensional unit depth, width and length configurations available in the full range as well as the many choices on grilles, trough materials and finishes.

Outputs based on 70 degrees C mean temperature, 20 degrees C ambient temperature.

Clear

Enquire about wholesale orders for Hitte Natural Convection Trench Heating

Send enquiry or call on +44 (0)1450 372103

Enquire about Hitte Natural Convection Trench Heating

Send enquiry or call on +44 (0)1450 372103

APPLICATIONS

Trench Heating is now universally found throughout buildings of all type including homes, offices, restaurants, shopping malls, galleries and museums providing discreet heating within entrance halls, reception areas, corridors, living and office spaces and conservatories.

Subtle, it perfectly complements the modern minimalist interior design style and is ideal where space is at a premium. It is often the architect’s heating system of choice when seeking to utilise natural light in the most effective way and incorporating large areas of glazing in new developments, building extensions or refurbishments.

Hitte Natural Convection Trench heating is a highly effective,  quiet and discreet heating solution. It is set into the floor, within a trench, and the heat rises, by means of natural convection, through an attractive aluminium grille that sits flush with the floor surface. It can be used either as a primary heating system or a secondary system where it will help increase overall heating system efficiency by counteracting downdraught and condensation in highly glazed areas.

The Hitte Natural Convection Trench Heating units use piped hot water (LPHW) as the heat source. The heat output therefore directly relates to the flow/return temperatures of that source whether a conventional hot water boiler, solar energy hot water system or ground source heat pump. Internal surfaces are insulated and coated with heat reflective finish to improve the efficiency of the trench.

AVAILABLE ONLINE

  • Supplied in standard lengths of 1m and 2m
  • Supplied in depths of either 125mm  or 80mm  for situations where space is at premium
  • Supplied in widths of  either 175mm or 305mm for situations where increased heat output is required
  • Standard grille of aluminium anodised finish
  • Trough Material of 304L Stainless Steel as standard

*Contact us for info on our full Hitte range of dimensional configurations and types*

FULL HITTE TRENCH HEATING RANGE

TECHNICAL INFORMATION

Product CodeLength (mm)Width (mm)Depth (mm)Output (W)
HitteNXX1251752000XNXX

2000175125462
HitteNXX0801752000XNXX

200017580249
HitteNXX1253051000XNXX
1000305125356
HitteNXX1253052000XNXX
2000305125875
HitteNXX0803052000XNXX
200030580477

OUTPUT TABLE

Height(mm)Width(mm)Temperature of water1000mm2000mm
8017595/85/20149W388W
75/65/20101W249W
50/40/2046W113W
8030595/85/20287W747W
75/65/20194W477W
50/40/2087W213W
12517595/85/20283W737W
75/65/20188W462W
50/40/2081W199W
12530595/85/20558W1455W
75/65/20356W875W
50/40/20141W346W

INSTALLATION

Our Trench Heaters should be installed by suitably qualified builders and plumbers. The unit should be securely fixed and all water connections installed as per instructions.

Alternatively, contact us to obtain a quote from our own installation team.