From: £710.00 ex VAT
Architecturally styled heavy duty fan wall heaters for commercial areas. Rugged construction without the ‘industrial’ look makes it an ideal choice for entrance lobbies, stairways and waiting rooms. Higher capacities, up to 5kW, are ideal for larger area heating requirements.
The Architectural Electric Wall Heater is a heavy duty wall heater with heat outputs from 2kW-5kW depending on the model selected.
It’s rugged construction yet sleek design make it an ideal choice for entrance lobbies, stairways and waiting rooms. Models with a higher heat output, up to 5kW, are a great solution for heating larger commercial and industrial areas.
All models are designed for recess mounting within a wall. An addition surface mounting box can be purchased if surface mounting is required.
All models are suitable for 230V single phase supply and feature an integral tamper-proof thermostat located behind the removable grille panel.
|Volts||Air Vol |
|CHDA-2000||For recess mounting||2.0||230||340||541||443||146||12.0|
|CHDA-3000||For recess mounting||3.0||230||340||541||443||146||12.0|
|CHDA-4000||For recess mounting||4.0||230||340||541||443||146||12.0|
|CHDA-5000||For recess mounting||5.0||230||340||541||443||146||12.0|
|CHDA-S||Surface mounting box||541||443||146||1.0|
The units must be vertically mounted, not less than 300mm from any vertical surface or the floor. Each unit is supplied for recess mounting, surface mounting requires the optional surface box (CHDA-S). The unit should be securely fixed.
All electrical connections should be made by a suitably qualified person in accordance with the latest edition of the IEE Requirements for Electrical Installation (BS 7671:2008).